💻USB (OTG)

Interact directly with WLAN Pi from a host device

Using the WLAN Pi's USB host interface in Windows 10dutchwifigeek.blogspot.com

Get Connected

1. Connect laptop to WLAN Pi OTG port (top)

2. Verify network is recognised by your laptop Look at laptop network interface

3. FPMS will display your WLAN Pi hostname and IP

4. Open up your browser of choice and navigate to

   http://wlanpi-xxx.local

   Alternatively you can use the link local IP address\

   http://169.254.42.1

5. You should see this landing page

This169.254.42.1 IP address will be the same every time

This is a statically configured link local IP address