# Ethernet

1. Plug your WLAN Pi Pro into your LAN
2. This should bring the ethernet port up\
   FPMS will confirm this by displaying the assigned IP address in white text\
   Also see the negotiated link speed
3. Now that we have an internet connection we will run through the FPMS functions

* [ ] `Network > Interfaces`
* [ ] `Network > WLAN Interfaces`
* [ ] `Network > Eth0 IP Config`
* [ ] `Network >` Eth0 VLAN
* [ ] `Network > LLDP Neighbour`
* [ ] `Network > CDP Neighbour`
* [ ] `Network > Public IPv4`
* [ ] `Network > Public IPv6`
* [ ] `Utils > Reachability`
* [ ] `Utils > Speedtest` (this is not 'official Ookla Speedtest')
* [ ] `Utils > Port Blinker`