For the complete documentation index, see llms.txt. This page is also available as Markdown.

๐ŸชŸWindows: WiFi Explorer Pro

Wi-Fi scanner and analyzer for Windows from Intuitibits

Hunting rogue access points using this tri-band scanner setup

Overview

In this lab, we'll install Intuitibits' WiFi Explorer Pro for Windows onto your Windows laptop. We'll configure it to use the WLAN Pi Go as an external sensor. This allows us to leverage the 6 GHz capabilities of the WLAN Pi Go, which may be missing from your current computer.

The WLAN Pi platform, as an external sensor, also provides opportunities to perform scanning of networks that may be in remote locations. Using a VPN connection between the laptop and WLAN Pi makes it possible to use the scanning capabilities to assist with remote troubleshooting tasks.

What You'll Need for This Lab

To complete this lab, you'll need the following items:

  • A Windows laptop with administrative privileges to install software

  • A WLAN Pi Go

WiFi Explorer Pro Installation

Let's start by installing WiFi Explorer Pro for Windows:

  1. Download the installer by clicking this link.

  2. Launch the installer and follow the instructions.

    Click Install to install WiFi Explorer Pro for Windows
  3. If you didn't uncheck "Launch when ready", the app will open and a 7-day free trial will start immediately.

  4. The main window of the app now opens. Let's left-click the Signal column once to ensure WiFi Explorer displays the access points with the strongest Received Signal Strength Indicator (RSSI) at the top of the scan results.

    Click Signal column to display strongest RSSI scan results at the top

Explore the user interface

Once WiFi Explorer Pro is installed, please take a few moments to ensure the application launches correctly and familiarise yourself with the user interface. If you've used Wi-Fi scanning apps before, we are confident you will feel at home within WiFi Explorer Pro for Windows.

By default, Wi-Fi Explorer Pro uses the internal adapter of your laptop to scan for networks when first launched. Within a few seconds, you should see a summary of Wi-Fi networks detected by the laptop adapter as it scans all Wi-Fi channels. Although this is excellent information, we want to investigate how to use the WLAN Pi as an external sensor in this lab.

Currently scanning using built-in Wi-Fi adapter of your laptop

Connectivity

To use the WLAN Pi Go as a sensor, there must be IP connectivity between the laptop and the WLAN Pi Go.

We'll connect to the WLAN Pi Go using OTG, which means you simply have to connect the WLAN Pi Go to your laptop using the provided USB-C cable.

Once both devices have their network connection established, you can use 10.42.0.1 to reach the WLAN Pi Go.

WLAN Pi Go Setup

Review the instructions below to set up your WLAN Pi Go as a sensor for WiFi Explorer Pro. This will allow you to scan the 2.4 GHz, 5 GHz and 6 GHz (๐Ÿค“) bands using the wireless adapter of the WLAN Pi Go.

  1. Open the Manage Remote Sensors dialog by clicking the dropdown v arrow and click Manage Remote Sensors...

    Open dropdown and sensor management dialog
  2. Under the Sensors tab, click the + button.

    Add a new sensor
  3. Enter 10.42.0.1, which is the IP address of your WLAN Pi Go.

IP address of WLAN Pi Go
  1. Enter "WLAN Pi Go" as the name of the new sensor. This is useful when you have multiple remote sensors deployed.

    Enter name

Scan using the WLAN Pi Go

WiFi Explorer Pro is now ready to scan using WLAN Pi Go.

  1. Select the WLAN Pi Go from the dropdown menu.

  1. In the authentication prompt, enter username wlanpi and password wlanpi.\

  2. Let's add a new column Channel Utilization to the current view. Right-click anywhere in any existing column name (for example, near Annotations), and select Channel Utilization.

  3. The new column appears and we see QBSS information as broadcasted by the APs in their beacons. Note that you might need to also enable this feature on your controller or AP.

    Scan results captured by WLAN Pi and sent to laptop running WiFi Explorer Pro
  4. We now select the 6 GHz filter in the top bar. There we go; there are APs using 6 GHz.

WiFi Explorer Pro also highlights PSC channels in red/orange. So you could tell that channel 37 is one of those channels by looking at the bottom part of the spectrum view.

Congratulations, you've completed the Wi-Fi scanning lab for Windows.

Last updated

Was this helpful?